Jetex 2.75″ Stainless Steel Half Exhaust System with Round 100mm L+R Tail Pipes EC Fits Audi A4 B8 A5 2.0 TDI 2WD Quattro
Brand New 100% Genuine Jetex Half Exhaust System
- Performance Stainless Steel System
- Polished 301 Stainless Steel Round 100mm L+R Tail Pipes
- System Pipe 2.75 inch or 70 mm then 2.25 inch or 57 mm
- EC Approved ✔️
About Jetex Performance Exhausts
Jetex Performance Exhausts, Since 1986. With 30 years of exhaust design and development experience, Jetex have gained a reputation of producing exhausts that are well-engineered, perform consistently and create a perfect harmony between car and exhaust.
Absorption Designed
Sound reduction is a critical design concern with any exhaust system. Standard exhausts use a baffle design where a series of plates slow the exhaust gases, but ultimately this leads to an increase in backpressure. Jetex silencers have no baffles. Instead, noise is reduced by absorption through a centre perforated tube. Consequently, there is less gas flow restriction and so back pressure is reduced, torque is increased and engine performance is enhanced.
Mandrel Bends
It is essential that gas flow from the engine is unrestricted and flows smoothly along the whole length of the exhaust system. All Jetex bends (where possible) are mandrel bent rather than cut and welded. This ensures that the gas exits as quickly as possible, ensuring back pressure reduction and enhanced engine performance.
Tailpipes
All tailpipes are made from polished T304 stainless steel and are designed to complement the styling of each model. Most tailpipes are rolled inwards to create a clean and stylish look
Fitting Kit
A fitting kit is provided with every Jetex system. With each Jetex Performance Exhaust, you can expect a minimum of a set of clamps to allow the exhaust to be fitted to the car. However, in many cases and where appropriate, stepped adaptors for the OE pipework, rubber mountings and in some cases, extra hangers are also provided. (see pictures)
Notes:
- Fits Audi A4 (B8) + Audi A5 Diesel Turbo 2WD/Quattro (08+)
- Fits after the original downpipe
- Use diffuser from 6cyl. models.
See our shop for more Performance Cat Back Exhausts, Cats, De Cats, Engine Headers, Manifolds, Pipe Clamps, Weld-In Catalyst Converters plus 1000s more Genuine Performance & OEM Parts