Viair 200 PSI High-Pressure 2on2 Compressor Kit Car Tyre Inflator Air Ride Camping Leisure Off-Road 4×4 Campervan Splitty Amarok
Brand New 100% Genuine Viair Parts and accessories
Using two high output compressors mounted to a 2.0 gallon, 5-port air tank all required components are included to allow the installation of a high-pressure onboard air system that provides 200 PSI maximum pressure. 2on2 systems all come complete with an easy-to-install wiring harness and manifold to make wiring and plumbing the system straightforward.
There are a number of useful applications and uses for a Viair 2on2 compressor kit.
These can include, tyre inflation, the mobile use of any air tools, (for example, a tyre fitter, or a mobile mechanic), air horns, managing air locking differentials, or an air suspension system.
Whatever your application or use, you can rely on a Viair 2on2 Air System, every time, all the time.
2on2 Bolt-On Platform systems in universal models are not equipped with a cross member mounting bracket.
- 2.0 Gallon 5-Port Air Tank
- (2) 380C Air Compressors
- (2) 1/4” Stainless Steel Braided Leader Hoses
- (2) 1/4” JIC Fittings on Leader Hoses
- 1/4” NPT Swivel to 1/4” NPT Swivel
- T-Fitting (Remote Mount Filter)
- 1/4” NPT Drain Cock
- Sealed Pressure Switch with Delphi Connectors
(165 PSI On, 200 PSI Off)
(2) Loomed Compressor Wires Terminated
with Delphi Connectors
- Inline Fuse Holder with Fuse
- 1/4” NPT Safety Valve
- (4) 1/4” NPT M Recessed Plugs
All Fittings are NPT rated unless otherwise noted.
Included In Kit:
- 60-amp Fuse & Fuse Holder
- 80-Amp Relay
- (2) 1/4” BSP Adapters for Air Lockers
- T-Fitting 1/4″ NPT F x 1/4″ NPT F x 1/4″ NPT M
- 1/8″ to 1/4″ NPT Reducer
- Wiring Harness with Delphi Connectors
- (2) Delphi Connector Plug Kits
- Billet 1/4” NPT x 6-Port Manifold and Mounting Bracket
- Air Filter Housing with Installed Element
- (2) Replacement Air Filter Elements
- Dash Panel Air Pressure Gauge (0-160 PSI Illuminated)
- Air Pressure Regulator
- 15ft. DOT Air Line
- Permanent Magnetic Motor
- Duty Cycle: 100% @ 100 PSI
- Duty Cycle: 55% @ 200 PSI
- Max. Working Pressure: 200 PSI
- Max. Amp Draw: 44 Amps
- Ingress Protection Rating: IP67
- Dimensions: 18.5″L x 5.9″W x 13.5″H
- Net Weight: 30 lbs.
Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8″ is 10 ~ 11 ft. lbs.
Recommended torque for 1/4″ and 3/8″ is 16 ~ 18 ft. lbs.
You can find the Viair instruction manual for the 2on2 compressor kits here
See our shop for more Viair products & accessories, plus 1000s more Aftermarket, Performance & Genuine OEM VW/Audi/Skoda/Seat Parts