Viair 150 PSI High-Pressure 2on2 Compressor Kit Car Tyre Inflator Air Ride Camping Leisure Off-Road 4×4 Campervan Splitty Amarok

Brand New 100% Genuine Viair Parts and accessories

Using two high output 400C compressors mounted to a 2.0 gallon, 5-port air tank all required components are included to allow the installation of a high-speed onboard air system that provides 150 PSI maximum pressure. 2ON2 systems all come complete with an easy-to-install wiring harness and manifold to make wiring and plumbing the system straightforward.

There are a number of useful applications and uses for a Viair 2on2 compressor kit.

These can include, tyre inflation, the mobile use of any air tools, (for example, a tyre fitter, or a mobile mechanic), air horns, managing air locking differentials, or an air suspension system.

Whatever your application or use, you can rely on a Viair 2on2 Air System, every time, all the time.

2on2 Bolt-On Platform systems in universal models are not equipped with a cross member mounting bracket.

Pre-Installed: 

• 2.0 Gallon 5-Port Air Tank
• (2) 400C Air Compressors
• (2) 1/4” Stainless Steel Braided Leader Hoses
• (2) 1/4” JIC Fittings on Leader Hoses
• 1/4” NPT Swivel to 1/4” NPT Swivel
• T-Fitting (Remote Mount Filter)
• 1/4” NPT Drain Cock
• Sealed Pressure Switch with Delphi Connectors
  (110 PSI On, 145 PSI Off)
  (2) Loomed Compressor Wires Terminated
  with Delphi Connectors
• Inline Fuse Holder with Fuse
• 1/4” NPT Safety Valve
• (4) 1/4” NPT M Recessed Plugs

All Fittings are NPT rated unless otherwise noted.

Included In Kit: 

• 60-amp Fuse & Fuse Holder
• 80-Amp Relay
• (2) 1/4” BSP Adapters for Air Lockers
• T-Fitting 1/4″ NPT F x 1/4″ NPT F x 1/4″ NPT M
• 1/8″ to 1/4″ NPT Reducer
• Wiring Harness with Delphi Connectors
• (2) Delphi Connector Plug Kits
• Billet 1/4” NPT x 6-Port Manifold and Mounting Bracket
• Air Filter Housing with Installed Element
• (2) Replacement Air Filter Elements
• Dash Panel Air Pressure Gauge (0-160 PSI Illuminated)
• Air Pressure Regulator
• 15ft. DOT Air Line

Specifications:

• 12-Volt
• Permanent Magnetic Motor
• Duty Cycle: 33% @ 100 PSI
• Max. Working Pressure: 2150 PSI
• Max. Amp Draw: 59 Amps
• Ingress Protection Rating: IP67
• Dimensions: 18.5″L x 5.9″W x 13.5″H
• Net Weight: 30 lbs.

Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8″ is 10 ~ 11 ft. lbs.

Recommended torque for 1/4″ and 3/8″ is 16 ~ 18 ft. lbs.

You can find the Viair instruction manual for the 2on2 compressor kits here

See our shop for more Viair products & accessories, plus 1000s more Aftermarket, Performance & Genuine OEM VW/Audi/Skoda/Seat Parts