VW Corrado 1.8 16V G60 VR6 Jetex 2.5″ Stainless Race Pipe Performance Upgrade Front Silencer Delete
Please note this is only for fitment with a Jetex system, the race pipe is to replace the silencer listed below only, this is not for fitment to OEM or any other system. Please confirm that you have the Jetex system in the notes when purchasing
Genuine Brand New 100% Genuine Jetex Race Pipe
- Performance Stainless Steel Front Silencer Delete Race Pipe
- System Pipe 2.5inch or 63.5mm
- Race pipe to replace front silencer 26-2R
- Not for fitment with OEM or any other exhaust system
About Jetex Performance Exhausts
Jetex Performance Exhausts, Since 1986. With 30 years of exhaust design and development experience, Jetex has gained a reputation for producing exhausts that are well engineered, perform consistently and create a perfect harmony between car and exhaust.
Absorption Designed
Sound reduction is a critical design concern with any exhaust system. Standard exhausts use a baffle design where a series of plates slow the exhaust gases, but ultimately this leads to an increase in back pressure. Jetex silencers have no baffles. Instead, noise is reduced by absorption through a centre perforated tube. Consequently, there is less gas flow restriction and so back pressure is reduced, torque is increased and engine performance is enhanced.
Mandrel Bends
It is essential that gas flow from the engine is unrestricted and flows smoothly along the whole length of the exhaust system. All Jetex bends (where possible) are mandrel bent rather than cut and welded. This ensures that the gas exits as quickly as possible, ensuring back pressure reduction and enhanced engine performance.
Tailpipes
All tailpipes are made from polished T304 stainless steel and are designed to complement the styling of each model. Most tailpipes are rolled inwards to create a clean and stylish look
Fitting Kit
A fitting kit is provided with every Jetex system. With each Jetex Performance Exhaust, you can expect a minimum of a set of clamps to allow the exhaust to be fitted to the car. However, in many cases and where appropriate, stepped adaptors for the OE pipework, rubber mountings and in some cases, extra hangers are also provided. (see pictures)
Notes:
- Fits VW Corrado 1.8 16V & G60, VR6 (from chassis 50-N-000 0001)
- Fits onto Original Catalytic Converter
- Race pipe to replace front silencer 26-2R
See our shop for more Performance Cat-Back Exhausts, Cats, De Cats, Engine Headers, Manifolds, Pipe Clamps, Weld-In Catalyst Converters plus 1000s more Genuine Performance & OEM VW Parts
Reviews
There are no reviews yet.