CARTEK Motorsport Steering Wheel Wireless Controls System with Paddleshift Kit R R32 VR6 S3 RS3 TT RS Turbo Supercharged

£849.00 exc vat

6 customers interested in this product

CARTEK Motorsport Steering Wheel Wireless Control System

A Plug ’n’ Play Motorsport solution for your steering wheel! Complete With Paddleshift Kit

 

Brand New Genuine CARTEK Motorsport Steering Wheel Wireless Control System With Paddleshift

The fast response time of the CARTEK Wireless Control system mean that we have been able to produce a version for paddle shift race cars. Two of the eight channels have been reserved for the paddle shift, whilst the other six are completely configurable. The paddles are manufactured out of Carbon Fibre, making it an extremely light weight solution.
The Wireless Control System from CARTEK is the quickest and easiest way to install pushbutton controls to a detachable racing steering wheel.
The system has a total 8 pushbutton switches which are wirelessly linked to 8 relays within the Relay Control Unit. Though with 2 reserved for Paddleshift, you can utilise the remaining 6 channels as you wish. These relays are microprocessor controlled and individually configurable to provide a choice of functions including momentary, latching and flashing modes for uses such as: PTT radio, pit lane limiter, dash menus, lights, indicators, etc..
The complete system includes a universal fitting steering wheel panel, incorporating 8 sealed pushbutton (2 reserved) switches and infra red transmitter module, an infra red receiver and a relay control unit

HOW IT WORKS
Cartek Motorsport Steering Wheel Wireless Controls How It Works

LONG BATTERY LIFE
26280 HOURS OF BATTERY LIFE
The infrared Transmitter module is mounted to rear of the Steering Wheel Pushbutton Panel and is battery powered. The Transmitter only consumes electrical power when a pushbutton is pressed and therefore does not need to be turned off when not in use.
When a pushbutton is pressed an LED on Transmitter will show the status of the internal battery. If the LED shows Green then the battery is in good condition, if the LED shows Red then the battery needs to be replaced.

CHANNEL MODE CONFIGURATION

Each channel can be individually configured to perform any 1 of 5 different functions:
Mode 1: Momentary action
Mode 2: Latching (without memory)
Mode 3: Latching (with memory)
Mode 4: Flashing (slow speed, minimum 5 seconds)
Mode 5: Flashing (fast speed, minimum 3 flashes)
Mode 6: Flashing (slow speed, latching)

It is also possible to alter which pushbutton is allocated to which channel. Full reset function is also available.

CUSTOMISE YOUR OWN
Cartek Motorsport Steering Wheel Wireless Controls System R R32 VR6 S3 RS3 TT RS Turbo SuperchargedCartek Motorsport Steering Wheel Wireless Controls System R R32 VR6 S3 RS3 TT RS Turbo Supercharged

 

(Steering wheel not included)
The Wireless Control System can be mounted to most racing and aftermarket steering wheels.

It now comes with a multi coloured vinyl pack and UV Fluorescent vinyl pack (glow in dark under UV light) allowing full customisation of the steering wheel.

ZERO INTERFERENCE

CARTEK uses Infrared to communicate between the Steering Wheel and Control System.

By using this technology the wireless communication is completely protected from outside signals such as radio waves and EMF unlike other systems on the market. The system also allows the wireless link to be full 360 degrees.

Cartek Motorsport Steering Wheel Wireless Controls System R R32 VR6 S3 RS3 TT RS Turbo Supercharged Cartek Motorsport Steering Wheel Wireless Controls System R R32 VR6 S3 RS3 TT RS Turbo Supercharged

IMPORTANT NOTE
MOTORSPORT IS DANGEROUS
THIS PRODUCT IS DESIGNED FOR MOTORSPORT USE ONLY AND SHOULD NOT
BE USED ON ROAD/STREET VEHICLES OR ON PUBLIC HIGHWAYS
NO WARRANTY IS MADE OR IMPLIED REGARDING ANY CARTEK PRODUCTS TO
PROTECT USERS FROM INJURY OR DEATH
USER ASSUMES ALL RISKS

Relay control unit
Size: W=108 mm,  H=30 mm, L=85 mm
Weight: 240g
Rear connectors: 2 x 8 Way MOLEX Minifit
1 x 2 Way MOLEX Minifit
1 x Jack Plug
Power: 12v
Relay current rating: 10 A
Response time: 70ms
Steering wheel switch panel
Size: W=194 mm,  H=160 mm
Weight: 20g (including battery)
Power: Internal battery mn21 (last approx 3 years)
Part Numbers: CK-WX-07 (6 Channel Paddleshift Kit)

Includes

  • 8 Channel Universal Fitting Control Panel
  • Receiver
  • Relay
  • Control Unit
  • Paddleshift Kit

 

See our shop for standard 8 channel (non paddleshift) Version

Looking for something in particular or have a question? Send us a request and we’ll do our best to source it or help.

Check out the shop for more 1000s more Performance & Genuine OEM Parts

Additional information

Weight 2.2 kg
Brand

Manufacturer Part Number

Reviews

There are no reviews yet.

Be the first to review “CARTEK Motorsport Steering Wheel Wireless Controls System with Paddleshift Kit R R32 VR6 S3 RS3 TT RS Turbo Supercharged”

We Ship Parts Worldwide Daily & comply with all tax regulations

VAT / Sales Taxes / Customs Import Duty:
Vat is charged for UK buyers only at the checkout. For buyers outside of the UK, Vat is removed. Buyers outside of the UK are subject to local/state taxes and customs duty upon import. We do not charge vat for sales outside the UK.

Shipping:
We ship parts worldwide on a daily basis, from bolts and nuts to complete panels.
Some exclusions apply. i.e Touch up paint can not be shipped, but oil up to 1 Litre can be shipped.
Shipping is calculated at the checkout after address input. Some large items may require us to check and calculate.
All parts are shipped in suitable packaging and packed so the item arrives safely.

ECO Friendly:
Our website and server is run on hydroelectric power, pure green energy.

Packaging:
We aim to use more paper based products, i.e paper bags instead of snap bags, paper tapes instead cellotape, stretchy paper weave instead of bubble wrap or bubble wrap made with recycled materials, all where possible and use thicker cardboard for panels or paper outer bubble bags for small items, panels still need strong cellotape, gafer tape and sometimes bubble wrap is needed for fragile or rarer nos parts...
We always strive to use less plastic and constantly review and trial new methods but we also want to ensure the safe arrival of parts. Please reuse or recycle packaging.

Legislations: We support, contribute and comply with country specific requirements such as the German Packaging Act VerpackG when placing packaging materials onto the market and the California P65 warnings are present on current production parts known to contain lead such as stero crystal displays.

Recycle: We recycle the bulk of our own waste from oil to cardboard via approved recyclers only and encourage you to reuse or dispose of old parts and packaging only in accordance with local regulations.
Exc parts on exchange where you must return the old part to us as stated, these parts are then recycled or even refurbished by the manufacturer.